Environmental Specifications - Miller Maxstar 400 Owner's Manual

4-4. Environmental Specifications

A. IP Rating (All Models)
B. Temperature Specifications
Operating Temperature Range*
14 to 104 °F (-10 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
C. Information On Electromagnetic Compatibility (EMC) (Dynasty 400)
! This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
VA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary,
that the system impedance complies with the impedance restrictions.
D. Information On Electromagnetic Compatibility (EMC) (Maxstar 400)
! This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
VA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary,
that the system impedance complies with the impedance restrictions.
E. Information On Electromagnetic Compatibility (EMC) (Dynasty 800)
! This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
9.4MVA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if neces-
sary, that the system impedance complies with the impedance restrictions.
F. Information On Electromagnetic Compatibility (EMC) (Maxstar 800)
! This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
3.3MVA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if neces-
sary, that the system impedance complies with the impedance restrictions.
OM-275857 Page 16
.
A complete Parts List is available at www.MillerWelds.com
This equipment is designed for outdoor use.
at the point of common coupling is less than 42.7mW (or the short−circuit power S
max
at the point of common coupling is less than
max
at the point of common coupling is less than
max
at the point of common coupling is less than
max
IP Rating
IP23
Storage/Transportation Temperature Range
−4 to 131 °F (−20 to 55°C)
42.7mW (or the short−circuit power S
17.03mW (or the short−circuit power S
49.09mW (or the short−circuit power S
IP23 2017−02
Temp_2016- 07
is greater than 3,746,329
sc
ce-emc 1 2014-07
is greater than 3,746,329
sc
ce-emc 1 2014-07
is greater than
sc
ce-emc 1 2014-07
is greater than
sc
ce-emc 1 2014-07