Section 8 − 28-Pin Advanced Automation Operation; Controls - Miller Maxstar 400 Owner's Manual

SECTION 8 − 28-PIN ADVANCED AUTOMATION
8-1.

Controls

4
.
To activate 28−pin Advanced Automa-
tion, see Section 5-6C
.
For all front panel switch pad controls:
press switch pad to turn on light and en-
able normal function.
.
Green on nameplate indicates a TIG
function, Gray indicates a normal Stick
function.
1 Encoder Control
Use Encoder control in conjunction with ap-
plicable front panel function switch pads to
change values for that function.
.
A complete Parts List is available at www.MillerWelds.com
OPERATION
5
2 Memory Card Port And Indicator
Port is used to add features to the machine,
and update software. Indicator is lit while
card is being accessed.
3 Ammeter And Parameter
Shows actual amperage while welding. It al-
so shows parameter selection options when
in any menu.
4 Voltmeter And Selected Parameter
Display
2 3
6
Shows actual rectified average voltage
when voltage is present at the weld output
terminals. It also show parameter descrip-
tions when in any menu.
5 Process Controls
6 Gas/DIG Controls
Display
1
273670-B
OM-275857 Page 49