Table of Contents
Advertisement
5. Pull the M.2 SSD module away from the BOSS card.
Figure 88. Removing the M.2 SSD module
a. module connector (2)
b. screw (2)
c. module (2)
Installing the M.2 SSD module
About this task
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
Steps
1. Align the M.2 SSD module connectors with the connectors on the BOSS card.
2. Align the M.2 SSD module downwards until the module is seated firmly on the card.
3. Secure the M.2 SSD module on the BOSS card with the screw.
BOSS card
131
Advertisement
Table of Contents
