System Setup Details; System Bios - Dell EMC XC640 Series Installation And Service Manual

System Setup details

The System Setup Main Menu screen details are explained as follows:
NOTE: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.
Option Description

System BIOS

Enables you to configure BIOS settings.
iDRAC Settings Enables you to configure the iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI
(Unified Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using
the iDRAC settings utility. For more information about this utility, see Integrated Dell Remote Access
Controller User's Guide at Dell.com/idracmanuals.
Device Settings Enables you to configure device settings.
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, PCIe
NVMe RAID mode, and set the SATA enable or disable USB ports.
NOTE: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
About this task
NOTE: The XC Series Appliance and XC Core System does not support the NVDIMM-N, RAID, or UEFI settings.
The System BIOS Settings screen details are explained as follows:
Option Description
System Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Information
Memory Settings Specifies information and options related to the installed memory.
Processor Specifies information and options related to the processor such as speed and cache size.
Settings
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
32 Pre-operating system management applications