Next steps
Install the
IDSDM/vFlash
Installing the IDSDM/vFlash card
Prerequisites
Follow the safety guidelines listed in
Steps
1. Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see
2. Align IDSDM/vFlash card with the connector on the system board.
3. Push IDSDM/vFlash card until it is firmly seated on the system board.
Figure 46. Installing IDSDM/vFlash card
Next steps
1. Install the
micro SD
card.
NOTE:
Re-install the micro SD cards into the same slots based on the labels you had marked on the cards during
removal.
2. Follow the procedure listed in
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the flexibility of selecting different
network connectivity options.
88
Installing and removing system components
card.
Safety instructions
System board jumpers and connectors
After working inside your system
on page 55.
on page 123.
on page 56.