Figure 35. Removing the expansion riser 1A
Figure 36. Removing the expansion riser 2A
Next steps
Install the
expansion card
riser.
Installing an expansion card riser
Prerequisites
1. Follow the safety guidelines listed in
Safety instructions
on page 55.
2. Before installing the expansion card riser 2A, install an
expansion card into the
riser, if applicable.
Steps
1. If removed, install the
expansion cards into the expansion card
riser.
2. Holding the touch points, align the expansion card riser with the connector and the riser guide pin on the system board.
Installing and removing system components
81