Air shroud
The air shroud directs the airflow across the entire system. Air shroud prevents the system from overheating and is used to
maintain uniform airflow inside the system.
Removing the air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
Hold the air shroud at both ends and lift it away from the system.
Figure 21. Removing the air shroud
Next steps
If applicable, install the
air
Installing the air shroud
Prerequisites
1. Follow the safety guidelines listed in
2. If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.
Steps
1. Align the tabs on the air shroud with the slots on the system.
Safety instructions
Before working inside your system
shroud.
Safety instructions
on page 55.
on page 56.
on page 55.
Installing and removing system components
63