Shutting Down Using The Cisco Imc Gui; Shutting Down Using Cisco Imc Cli - Cisco IEC6400 Installation And Configuration Manual

Shutting Down using the Cisco IMC GUI

• Emergency shutdown - Press and hold the Power button for four seconds to force the main power off and immediately
enter standby mode.
Shutting Down using the Cisco IMC GUI
Before you begin
You must log in with user or admin privileges to perform this task.
Step 1
In the Cisco IMC home page, click Host Power > Power Off.
A confirmation pop-up appears.
Step 2 Click OK.
The operating system performs a graceful shutdown, and the gateway goes to standby mode, which is indicated by an
amber Power button/LED.

Shutting Down using Cisco IMC CLI

Before you begin
You must log in with user or admin privileges to perform this task.
Step 1
Click Launch vKVM in the Cisco IMC interface.
The Launch vKVM opens in a new window.
Step 2
At the server prompt, enter:
Step 3 At the chassis prompt, enter:
Step 4
(Optional) You can also directly shut down the gateway using the Power off option in Launch vKVM, click Power >
Power Off System.
A confirmation warning appears.
Step 5
(Optional) Click Confirm.
The operating system performs a graceful shutdown, and the gateway goes to standby mode, which is indicated by an
amber Power button/LED.
Cisco IEC6400 Edge Compute Appliance Installation and Configuration Guide, Release 1.0.0
52
device# scope chassis
device/chassis# power shutdown
Shutting Down and Powering off the Gateway