Configuring And Validating Smart Licensing; Overview Of Smart Licensing Support - Cisco IEC6400 Installation And Configuration Manual

Configuring and Validating Smart Licensing

•
•
•
•
•
•
•

Overview of Smart Licensing Support

Smart licensing for the gateway running in URWB mode supports the following scenarios:
• Smart license management provides a seamless experience with the various aspects of licensing.
• Gateway controls the feature based on the license type:
• The platform can specify the number of license seats reserved. The system reports the higher value
• Smart transport mode connects to smart software manager (SSM) (formerly it was CSSM) directly to
• Airgap mode uses the downloaded file to sync with SSM manually.
• All radio devices in URWB mode (such as Catalysts IW9167E and IW9165) in the same URWB network
Overview of Smart Licensing Support, on page 45
Configuring and Validating Smart Licensing Using CLI, on page 46
Configuring Smart Licensing using GUI, on page 48
Configuring Smart License Seats Management using CLI, on page 49
Configuring Running License Level using CLI, on page 49
Verifying License Smart License Seat using CLI, on page 49
Configuring Running License Level for Gateway using CLI, on page 49
• Essentials
• Advantage
• Premier
between the reserved license count and the actual licenses consumed. You can specify the number of
purchased licenses for a deployment to avoid triggering a reporting event as the number fluctuates,
provided that it remains equal to or less than the number of seats reserved.
sync license usage.
require the same license level. This license level is set globally at the Mesh End or Global Mesh end.
The license levels for gateways is configured independently on each gateway. It can be configured at a
different level than the radio devices in the network.
Cisco IEC6400 Edge Compute Appliance Installation and Configuration Guide, Release 1.0.0
7
C H A P T E R
45