Schwinn 490e Service Manual page 83

!
Note: Your machine may not match the images provided exactly. Though the procedure shows the removal of both Upper
Handlebars, only remove one if you are not replacing both Upper Handlebars.
1. Unplug the Power Cord from the wall outlet and machine.
2. Gently compress the Exterior Handlebar Cover to
release it from the Interior Handlebar Cover. There are five
tabs that snap to secure each Cover.
3. Using a #2 Phillips screwdriver, remove the two screws
that attach the Interior Handlebar Cover to the Handlebars.
Set the hardware safely aside for reassembly.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and wait 5 minutes before cleaning, main-
taining or repairing this machine. Place the power cord in a secure location.
Exterior
Handlebar
Cover
83
Exterior
Handlebar
Cover
Interior
Handlebar
Cover