Schwinn 490e Service Manual page 37

5. Tilt the new Console to install the wide tab at the top
of the Console Mount Bracket. Route the Console cable
through the bracket.
6. Attach the Console to the Console Mount Bracket
before connecting the cables. Start lower screws first,
then tighten all screws. Connect the Console cable to the
Console Mast cable. Align the clips on the cable connectors
and make sure the connectors lock. Push the extra wire
down into the Console Mast.
NOTICE: Do not cut or pinch the cables.
X4
#2
* *
* *
37