Schwinn 490e Service Manual page 60

9. Re-assemble the machine in the reverse order of when
the parts were removed.
10. Plug the power cord into the machine and wall outlet.
11. Power on the machine. After the Power-Up/Welcome
screen appears, use the Resistance Level Quick keys 25
and 1 to confirm that the magnet caliper moves properly
between resistance level 1 and 25.
12. Final Inspection
Inspect your machine to ensure that all hardware is tight
and components are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct
performance in accordance with the Owner's
Manual.
60