Section 4 - Replacing the Main Shrouds
(continued after previous sections)
Note: To replace the Main Shrouds, the Front Lower and
Rear Shrouds must be removed, and the Front Upper
Shroud needs to be resting unsnapped on the Main
Shrouds.
1. Gently compress the Exterior Handlebar Cover to
release it from the Interior Handlebar Cover. There are five
tabs that snap to secure each Cover.
2. Using a #2 Phillips screwdriver, remove the two screws
that attach the Interior Handlebar Cover to the Handlebars.
Set the hardware safely aside for reassembly.
Exterior
Handlebar
Cover
66
Exterior
Handlebar
Cover
Interior
Handlebar
Cover