Schwinn 490e Service Manual page 63

Section 2 - Replacing the Front Upper Shroud
1. If replacing the Upper Front Shroud, remove the
hardware (indicated with oval) that attaches the Console
Mast with a 6mm hex wrench.
X4
2. Slightly lift the Console Mast from the Frame Assembly
and disconnect the Cables. Fully remove the Console Mast
with Cables.
Note: Do not pinch or cute the Cables. Do not allow the
Cable to fall into the Frame Assembly.
6mm
63
Console
Mast
Upper Front
Shroud
Console Cable