Note: The Resistance Sensor can be accessed by
gently flexing the Right Main Shroud outward
slightly. The Shrouds have been removed from
the images to provide additional details.
5. Disconnect the Resistance Sensor Cable Connector
from the Resistance Sensor.
6. Using a #2 Phillips screwdriver, remove the two screws
(indicated by ovals) that secures the Resistance Sensor.
7. Using a #2 Phillips screwdriver, connect the new
Resistance Sensor to the Frame.
8. Connect the Resistance Sensor Cable Connector to the
Resistance Sensor.
Resistance
Sensor
Resistance
Sensor
48
Split Cable As-
sembly
(Servo, Speed
and Resistance)
Resistance Sensor
Cable Connector