!
Note: Your machine may not match the images provided exactly.
1. Unplug the AC Adapter from the wall outlet and machine.
2. Flex the edges of the Front Lower Shroud to disengage
the 6 inside tabs from the Main Shrouds.
Note: It may be easier to pry up the edges of the Front
Lower Shroud using a flathead screwdriver. To
avoid damage to the surface of the Shrouds,
we recommend putting a piece of cloth over the
screwdriver blade.
Note: All Shrouds have been removed for clarity.
Make sure that power to the machine is discon-
nected before beginning this step.
3. Carefully disconnect the Servo Motor Cable Connectors.
NOTICE: Do not pinch or cut the cables.
4. Using a standard screwdriver, gently separate the tabs
(indicated by oval) that connects the Servo Motor Linkage to
the Servo Motor.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and wait 5 minutes before cleaning, main-
taining or repairing this machine. Place the power cord in a secure location.
Servo Motor Cable
Connectors
58
Servo Motor
Servo Motor
Linkage