Using the Simon XTi-5 security system
You can operate the self-contained security system through several different
methods:
•
Use the main screen icons to arm/disarm the system when you enter or exit
your home, check system status, and to determine which sensors are active.
•
Use the emergency screen to communicate with the central monitoring station
to report emergency panic, police, or fire alarms.
•
From the home screen, press the Status & Settings
certain user features. (See System configuration on page 20).
Note: Upon initial installation, the battery may not be fully charged for as long
as 36 hours. A low battery icon will be present and trouble beeps will sound
until the battery is sufficiently charged. After the initial charge, should the
panel lose AC Power and experience a low battery condition, the icon will
appear and trouble beeps will sound unless silenced. You can silence trouble
beeps by:
•
Arming or disarming the system.
or
•
Pressing the STATUS & SETTINGS icon and pressing LISTEN next to
Panel Status.
This will disable the sounder for 4 hours but the trouble indication will remain
until the battery is recharged.
Contact your installer to replace your backup battery.
This system is intended to be checked by a qualified technician at least once
every 3 years.
Panel controls
The self-contained panel provides the user interface for system operation and
programming system functions.
Simon XTi-5 User Manual
icon to program
3