Key Fobs; Key Fob - Interlogix Simon XTi-5 User Manual

Table 7: Phone controls
Action
Disarm
Arm doors and windows
Arm motion sensors
Arm doors, windows, and
motion sensors
Listen in to house
Check status
Hang up

Key fobs

Touchpads are used to control the security system from any location within or
near your home.

Key fob

If your installer programmed the key fob with no entry delay, and you arm the
system with the key fob, you must disarm your system before entering the home
to avoid causing an alarm.
If your installer programmed your system for remote touchpad arming, you must
enter your home to start the entry delay before you can use your key fob to
disarm the system.
Caution: To avoid causing false alarms, check with your installer on how your
touchpad/key fob options are programmed.
Panic alarms need to be silenced from the panel, a remote touchpad, or another
key fob. They cannot be silenced from the same key fob that activated the alarm.
For any key press on the key fob, hold the button until the indicator light blinks.
The key fob has the following buttons:
•
Lock (closed lock icon)
•
Unlock (open lock icon)
•
Star (star icon)
•
Light (light bulb icon)
Table 8 on page 16 describes how to use the key fob buttons.
Simon XTi-5 User Manual
Phone key presses
1
2
3
2 3
5 to listen in to the house
Once in listen in to house the
following options are available:
•
0 or 1 to speak
•
3 or 6 to listen
•
7 to extend call
0
9
Comments
System not already disarmed
Press 2 again to activate the no
delay feature
When in this mode, the user
cannot re-enter the previous
menu. You must hang up and call
back in to the panel to perform
additional functions.
15