Unvacated Premises; Swinger Shutdown - Interlogix Simon XTi-5 User Manual

To arm motion sensors (level 3):
1. Press .
2. Press MOTION SENSORS ONLY (AWAY) (see Figure 3 on page 8).
3. If a code is required, enter your code when the keypad screen appears.
The panel speaks Motions On, starts an exit delay, and sounds exit beeps in
groups of three until the exit delay expires.
Note: Depending on your configuration, this option may not appear.
To arm doors, windows, and motion sensors (level 4):
1. Press .
2. Press ARM ALL (AWAY) (see Figure 3 on page 8).
3. If a code is required, enter your code when the keypad screen appears.
The panel speaks Doors and Windows On, Motions On, starts an exit delay,
and sounds exit beeps in groups of four until the exit delay expires.

Unvacated premises

Unvacated premises is a feature that determines whether the system
automatically arms down to level 2 (doors and windows) if you arm the system to
level 4 (doors, windows, and motion sensors) without opening or closing a
perimeter door (on), or remains at the armed level chosen (off). This feature does
not work from a key fob. Autobypass must be on for this feature to work.
Ask your installer how this option is programmed.

Swinger shutdown

This setting determines if a sensor or zone will go into alarm only once during an
arming period (an active arming level) and will not be active again until the alarm
is canceled (Swinger Shutdown is enabled) or the sensor or zone will always be
active and will go into alarm multiple times during an arming period (an active
arming level) without canceling the alarm (Swinger Shutdown is disabled).
Note: Swinger shutdown does not affect Smoke, Fire, Carbon Monoxide and
Environmental sensors.
Ask your installer how this option is programmed and have them explain how it
will affect your system operation.
Simon XTi-5 User Manual 9