Simon Xti-5 Features; Cross-Zoning - Interlogix Simon XTi-5 User Manual

Simon XTi-5 features

The Simon XTi-5 features provide you with the ability to perform the following
functions:
•
Arm perimeter (doors and windows) and interior (motion) sensors to indicate
intruders.
•
Use the emergency screen to send quick response alerts to the central
monitoring station.
•
Access the system from a key fob (similar to the one used for your car).
•
Access the system from a remote telephone.
•
Disable sensors so you can leave a window open while the system is armed.
•
Get an audio alert when a protected door is opened while the system is
disarmed.
•
Get an audio alert if movement of a protected asset is detected (group 43).

Cross-zoning

Cross zoning (two-trip) refers to two different motion sensors that must be tripped
within two minutes of each other to report an alarm to the central station. Figure 2
below shows the path of a person walking from the kitchen to the living room.
When the person is detected walking through the kitchen, the motion sensor in
the kitchen is tripped, sounding a local alarm. If motion is detected by the living
room motion sensor within two minutes, an alarm report will be sent to the central
station.
Note: Contact your installer for more information.
Figure 2: Cross-zone diagram
6 Simon XTi-5 User Manual