Setting The Drive Mode; Setting The White Balance - Ricoh Pentax K-S1 Start Manual

Setting the Drive Mode

1
Press D in standby mode.
2
Select a drive mode.
Single Frame Shooting
(L)
Continuous Shooting
(Z/b)
Self-timer
(O/P)
Remote Control
(Q/R)
Exposure Bracketing
(T)
3
Press E.
The camera returns to standby mode.
u Caution
• There are restrictions on some drive modes when used
in some capture modes or in combination with some
other functions. (p.35)
32
Continuous Shooting (H) Continuous Shooting (H)
Cancel Cancel
Normal capture mode
Continuously takes pictures
while 0 is kept pressed.
The framerate varies according
to the shutter speed.
Releases the shutter about
12 seconds or 2 seconds after
0 is pressed.
Enables shooting with remote
control.
Select from [Remote Control] or
[Remote Control (3 sec. delay)].
Takes three consecutive images
at different exposure levels.
Z

Setting the White Balance

1
Press B in standby mode.
2
Select the White Balance.
OK OK
g Auto White Balance
g
u Multi Auto White Balance
h Daylight
i Shade
j Cloudy
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
k
s Fluorescent - Cool White
t Fluorescent - Warm White
l Tungsten
m Flash
n Color Temperature Enhancement
o Manual White Balance
p Color Temperature
3
Press E.
The camera returns to standby mode.
X
Auto White Balance Auto White Balance
WB± WB±
Cancel Cancel Check Check OK OK