Table of Contents
Advertisement
Trailing
H
Curtain Sync
G
Manual
K
Flash
Discharge
Available operations
R
Compensates the flash exposure.
Selects the amount of flash discharge (when
[Manual Flash Discharge] is selected).
M
Resets the compensation value to the
default setting.
3
Press E.
The camera returns to standby mode.
4
Press 1.
The built-in flash is popped up.
t Memo
• The flash modes that can be selected vary depending on the
capture mode.
40
Discharges a flash immediately
before closing the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they
are leaving a light trail behind them.
Sets the amount of flash discharge
between FULL and 1/128 power.
Setting the Drive Mode
1
Press D in standby mode.
2
Select a drive mode.
Single Frame Shooting
(L)
Continuous Shooting
(Z, b)
Self-timer
(O, P, Y)
Remote Control
(Q, R, S)
Bracketing
(T, 1, U)
Mirror Lock-up
Shooting
(c, d)
Multi-exposure
(V, z, W, X)
Interval Shooting
(q, U, V, w)
3
Press G to change detailed settings, and
press E.
Single Frame Shooting
Single Frame Shooting
Cancel
Cancel
Normal capture mode
Continuously takes pictures while
0 is kept pressed.
Releases the shutter about 12
seconds or 2 seconds after
0 is pressed.
Enables shooting with remote
control.
Takes consecutive pictures at
different exposure levels.
Takes pictures with the mirror
raised.
Creates a composite image by
taking multiple pictures and
merging them into a single image.
Automatically takes pictures at set
intervals.
OK
OK
Advertisement
Table of Contents
