Minolta EP1030 Manual page 22

18. Snap off the one E-ring to remove the Paper Feed Roller
*«% Assy.
NOTE
Use care not to loose the Set Pin when removing the Paper
@ Feed Roller Assy.
Lam J
1159D1224A
19. Snap off the one E-ring to remove the Pick-up Roller from
the Paper Feed Holder Assy.
=.
v
1159D123AA
20. Remove the Separator Holder and Spring from the Trans-
port Guide Plate.
1159D124AA
21. Snap off the one E-ring to remove the Separator Roller
Assy.
T159D125AA
1. Remove the Paper Feed Roller/Pick-up Roller.
2. Using a soft cloth dampened with alcohol, wipe clean the
Rollers.
Ti59D126AA
D-36
(3) Cleaning of the Separator Roll
j. Remove the Separator Roller Assy.
2. Using a soft cloth dampened with alcohol, wipe clean the
Separator Roll. ;
1. Open the Opening/Closeing Guide .
2. Using a soft cloth dampened with alcohol, wipe clean the
Upper Synchronizing Roller.
}. Remove the Transport Assy.
2. Using a soft cloth dampened with alcohol, wipe clean the
Lower Synchronizing Roller.
1. Remove the Transport Assy.
2. Using a soft cloth dampened with alcohol, wipe clean the
Upper Glass Roller.
Remove the Transport Assy.
Using a soft cloth dampened with alcohol, wipe clean the
Transport Roller.
1159D132AA
D-37