Table of Contents
Advertisement
10. Pull the longer of the two Cabie and wrap it around Pulleys
Aand B.
1159D086AA
NOTE
® The longer Cable is wrapped around the outside of
Pulley B.
@ The shorter Cable is wrapped around the inside of Pulley
B.
NOTE
Set the Rounded Tip as shown in the illustration to the left.
1159D088AA
11. Set the front and rear Cable in the groove for the Cable
Quide and attach to the Spring.
12. Peel tape off the Cable Drive Pulleys.
13. Secure the Optical Cover with two screws.
1159D166AA
D-22
115@SBD0205A
2-5. IMAGING UNIT
(1) Removal of the Imaging Unit
1.
Swing down the Front Door.
2.
Release and swing up the Upper Half of the copier.
3.
Remove one screw and the Imaging Unit from the copier.
3.
Push the lock lever and remove the IU.
(2) Replacement of the PC Drum
1.
Remove the two Covers.
2.
Remove the Connectors for the Ground-Shielded Har-
ness.
3.
Remove the Drum Charge Corona.
1159D091AB
D-23
Advertisement
Table of Contents
