Toshiba GR-200-5 Instruction Manual page 1019

OC1
10:48
_OC1-VTFBlk
Non
OC1-UseFor
Trip
OC1-OPMD
3POR
Before Changing Setting
Figure 12.5-3 Switch Setting Mode display
To begin the setting process, press ENTER. Once the setting is changed, the [*]
mark will appear alongside the name of the setting. When the change is canceled
or confirmed, the [*] mark will disappear automatically. Figure 12.5-4 shows the
operation of the switch setting mode.
OC1
10:48 24/56
_OC1-VTFBlk +
[ ENTER ]
Non
OC1-UseFor +
Trip
[CANCEL]
OC1-OPMD +
3POR
Figure 12.5-4 Operation of Switch Setting Mode
Note: the practical meanings are beyond the scope of this section. The above figure is
provided by way of example. The user should confirm setting values after making
any changes to their values. For verification, refer to "Confirmation of Setting"
discussed later.
List Selection Mode: it is composed of main-setting-screens and selection-list-
screens, as shown in Figure 12.5-5. In the main, the setting name and selected
item are displayed. Press ENTER to begin the setting process; the screen for
selection list will appear. Once a setting has been changed, the [*] mark will
appear alongside the name of the setting. When the change is canceled or
OC1
24/56
10:48
+
*OC1-VTFBlk
Block
+
OC1-UseFor
Trip
+
OC1-OPMD
3POR
After Changing
OC1
10:48 24/56
OC1-VTFBlk +
Non
OC1-UseFor +
Trip
OC1-OPMD +
3POR
OC1
10:48 24/56
*OC1-2fBlk +
Block
_OC1-UseFor +
Trip
OC1-OPMD +
3POR
- 999 -
6F2T0207 (0.01)
24/56
+
+
+
OC1
[►] / [▼] /
10:48
*OC1-VTFBlk
[▲] / [◄]
Block
OC1-UseFor
Trip
[►] / [▼] /
OC1-OPMD
[▲] / [◄] 3POR
[CANCEL]
[ENTER]
OC1
10:48
*OC1-2fBlk
[▼]
Block
OC1-UseFor
Trip
[▲]
OC1-OPMD
3POR
24/56
+
+
+
[ENTER]
24/56
+
+
+
GRE200 (5,6)