Toshiba GR-200-5 Instruction Manual page 569

DPOS01(Function ID: 512001) at Change Over Switch
Setting items
DPOS01-LGCTRCON
DPOS01-LGSLFFCT
DPOS01-LGEXFFCT
DPOS01-LGFEXOT
DPOS01-LGOEXOT
DPOS01-LGCNFFCT
DPOS01-PLSM
DPOS01-CPW
DPOS01-RST
DPOS01-CNTS
DPOS01-OPETMEN
DPOS01-APBD
DPOS01-CTRDIR
!Note: The user can enter a preferred setting name using GR-TIEMS.
Note: The DPOS function is available for a 2
omitted the other tables because this will be the same as the table for the 1
device with the exception of the device number.
Range
Unit
FixedLogic /
- Change logic about control condition
PLC
FixedLogic /
- Change logic about select fail factor
PLC
FixedLogic / Change logic about execute command fail
-
PLC factor
FixedLogic / Change logic about off direction execute
-
PLC output
FixedLogic / Change logic about on direction execute
-
PLC output
FixedLogic /
- Change logic about cancel command fail factor
PLC
Fix / Var - pulse mode
0.1 - 50.0 s control pulse width
1.0 - 100.0 s response check timer
NA / C-On / C-
- count status
Off / C-OnOff
Off / On - Operation Time Measurement enable
Process / Bay - status change origin
Off / On - Capable control direction
- 549 -
Contents
Device and other devices. We have
nd
6F2T0207 (0.01)
Default
Note
FixedLogic
FixedLogic
FixedLogic
FixedLogic
FixedLogic
FixedLogic
Fix
1.0
30.0
NA
Off
Process
On
st
GRE200 (5,6)