Configuring The Https Service - Fujitsu ORACLE M10-1 Installation Manual

WI9bay6CK0nrFRok+z54ez7BrDFBQVuNZx9PyEFezJG9ziEYVUag/23LIAiLxxBm
W9pqa/WxC21Ja4RQVN3009kmVwAAAIAON1LR/9Jdd7yyG18+Ue7eBBJHrCA0pkSz
vfzzFFj5XUzQBdabh5p5Rwz+1vriawFIZI9j2uhM/3HQdrvYSVBEdMjaasF9hB6T
/uFwP8yqtJf6Y9GdjBAhWuH8F13pX4BtvK9IeldqCscnOuu0e2rlUoI6GICMr64F
L0YYBSwfbwLIz6PSA/yKQe23dwfkSfcwQZNq/5pThGPi3tob5Qev2KCK2OyEDMCA
OvVlMhqHuPNpX+hE19nPdBFGzQ==
Fingerprint:
1024 9e:39:8e:cb:8a:99:ff:b4:45:12:04:2d:39:d3:28:15
/etc/ssh/ssh_host_dsa_key.pub
6.4

Configuring the HTTPS Service

The HTTPS service settings are intended for use of XSCF Web with a connection to
the XSCF-LAN and for use of a Web browser window. Use the settings described
here to enable/disable HTTPS and use HTTPS. HTTPS is disabled by default in these
systems. The XSCF Web console can be a secure console.
Note - We recommend enabling https for the maintenance work of XSCF log collection and
XCP firmware update.
1.
Execute the showhttps command to display the HTTPS service settings.
The following example displays an HTTPS service setting. The factory default
setting is "disabled".
XSCF> showhttps
HTTPS status: disabled
2.
Execute the sethttps command to configure HTTPS.
The following example enables the HTTPS service.
XSCF> sethttps -c enable
The web serverkey or web server certificate which has been
signed by an external certification authority does not exist.
Created self-signed certificate for HTTPS service.Continue?
[y|n] : y
If there is neither a Web server secret key nor a self-signed Web server certificate,
the command with "enable" specified automatically configures self-signing,
generates a Web server secret key, creates a Web server certificate, and enables
HTTPS to complete this work at one time.
3.
Execute the showhttps command, and confirm that the HTTPS setting has
changed to "enabled".
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
96