Creating A Physical Partition Configuration List (Pcl) - Fujitsu ORACLE M10-1 Installation Manual

XSCF> setupfru [ -m { y | n }] device location
To configure memory mirroring, specify -m y.
For device, specify the device for which to configure the mirroring. To configure
memory mirroring for all the CPUs mounted on the specified system board
(PSB), specify sb. To configure it only for the specified CPU, specify cpu.
For location, specify the location of the target device. You can specify it in the
xx-0-z format. For xx, specify a system board number. For z, specify a CPU chip
number from 0 to 3.
The following example sets all the CPUs mounted on physical system board 00-0
to memory mirror mode.
XSCF> setupfru -m y sb 00-0
3.
Execute the showfru command to check the set memory mirror mode.
XSCF> showfru -a
Device
sb
cpu
6.7 Creating a Physical Partition
Configuration List (PCL)
A physical partition (PPAR) consists of physical system boards (PSBs). In the
physical partition, the hardware resources of a physical system board (PSB) can be
assigned to logical system boards (LSB).
Use the showpcl command to check a physical partition configuration list (PCL), and
use the setpcl command to set a PCL.
For an explanation of the setpcl command options, see the setpcl command man page
or the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 XSCF Reference Manual.
For the SPARC M10-1, the physical partition configuration information is already set.
For the SPARC M10-1, only the configuration policy can be set.
Physical system board (PSB)
■
The PSB consists of all physical components mounted on a SPARC M10 System
chassis such as CPUs and memory. For the SPARC M10-1, the motherboard unit is
the physical system board (PSB). The other devices that are treated as physical
system boards (PSBs) may include PCIe cards and disk devices. Sometimes, a
physical unit of hardware being added/removed/replaced is described as a
physical system board (PSB).
Logical system board (LSB)
■
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
102
Location Memory Mirror Mode
00-0
00-0-0 yes