Saving Configuration Information; Saving Logical Domain Configuration Information - Fujitsu ORACLE M10-1 Installation Manual

XSCF> showpparprogress -p 0
PPAR Power Off PPAR#0 [ 1/ 3]
CPU Stop
PSU Off
The sequence of power control is completed.
XSCF>
9.
Install Oracle Solaris, and configure the system.
Oracle Solaris is preinstalled on the SPARC M10 system. According to the
purpose, either use the preinstalled Oracle Solaris as is or reinstall it.
To reinstall Oracle Solaris, install the latest Oracle VM Server for SPARC. For the
latest information on the supported Oracle Solaris versions and SRU, see the
Fujitsu M10/SPARC M10 Systems Product Notes.
The Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
presents a logical domain configuration example in "Chapter 3 Operations for
Domain Configuration." For a detailed procedure, see the Oracle VM Server for
SPARC manual of the version used. For details on the functions provided only
by the SPARC M10 systems, see the Fujitsu SPARC M12 and Fujitsu M10/SPARC
M10 System Operation and Administration Guide.
6.14

Saving Configuration Information

6.14.1

Saving logical domain configuration information

If you have changed the configuration of a logical domain, execute the ldm
add-spconfig command to save the logical domain information.
If you do not save the logical domain configuration information, the domain will
start with the previous configuration information the next time that the physical
partition starts.
For details on how to save the configuration information on all logical domains to an
XML file, see "10.12 Saving/Restoring Logical Domain Configuration Information in
an XML File" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System
Operation and Administration Guide.
1.
Switch from the XSCF shell to the control domain console of the target
physical partition.
2.
Execute the ldm list-spconfig command to display the currently saved logical
domain configuration information.
primary# ldm list-spconfig
3.
Execute the ldm add-spconfig command to save the logical domain status as
configuration information.
PPAR#0 [ 2/ 3]
PPAR#0 [ 3/ 3]
Chapter 6 Making the Initial System Settings 113