Mounting The Pci Expansion Unit In A Rack - Fujitsu ORACLE M10-1 Installation Manual

Figure 3-9 Attaching the left side of the CMA
Figure 3-10 Completed SPARC M10-1 configuration
3.4.2

Mounting the PCI expansion unit in a rack

This section describes the procedures for mounting the PCI expansion unit in an
equipment rack.
The method of securing the rails differs depending on the rack type. As described in
this section, the methods of securing them differ between the racks with supporting
columns having square holes and the racks with supporting columns having M6
screw holes.
1.
Confirm that the rack mount kit supplied with the PCI expansion unit is
complete.
Fujitsu M10-1/SPARC M10-1 Installation Guide ･ March 2019
48
REAR