Setting The Graph Modes; Checking And Changing The Graphing Mode - Texas Instruments TI-84 Plus Manual Book

• Window settings
• Format settings
You can store a picture of the current graph display to any of 10 graph picture variables
( through
Pic1 Pic9
pictures onto the current graph.

Setting the Graph Modes

Setting the Graph Modes Setting the Graph Modes Setting the Graph Modes

Checking and Changing the Graphing Mode

Checking and Changing the Graphing Mode
Checking and Changing the Graphing Mode Checking and Changing the Graphing Mode
To display the mode screen, press z. The default settings are highlighted below. To
graph functions, you must select
variables and before you enter the functions.
The TI-84 Plus has four graphing modes.
• (function graphing)
Func
• (parametric graphing; Chapter 4)
Par
• (polar graphing; Chapter 5)
Pol
• (sequence graphing; Chapter 6)
Seq
Chapter 3: Function Graphing
, and ; Chapter 8). Then you can superimpose one or more stored
Pic0
Func
mode before you enter values for the window
95