Steps For Running The Easydata App; Easydata Settings - Texas Instruments TI-84 Plus Manual Book

Steps for Running the EasyData App

Steps for Running the EasyData App Steps for Running the EasyData App Steps for Running the EasyData App
Follow these basic steps when using the EasyData App.
Starting EasyData
1. Attach your data collection device to your TI-84 Plus.
Make sure the cables are firmly connected.
2. If the EasyData app has not auto-launched, press Œ
and the } or † to select the EasyData App.
3. Press Í. The EasyData information screen is
displayed for about three seconds followed by the main
screen.
Quitting EasyData
1. To quit EasyData, select
The
Ready to quit?
been transferred to lists
(press s) to quit.
2. Press
OK

EasyData Settings

EasyData Settings EasyData Settings EasyData Settings
Changing EasyData settings
EasyData displays the most commonly used settings before data collection begins.
Chapter 14: Applications
(press s
Quit
screen is displayed, which indicates that the collected data has
through
L1 L4
.
)
on the TI-84 Plus.
407