Entering an Expression in the Equation Solver
Entering an Expression in the Equation Solver
Entering an Expression in the Equation Solver
Entering an Expression in the Equation Solver
To enter an expression in the equation solver, assuming that the variable
follow these steps.
1. Select
0:Solver
2. Enter the expression in any of three ways.
•
Enter the expression directly into the equation solver.
•
Paste a Y= variable name from the
Press y K, paste a Y= variable name from the
•
press Í. The expression is pasted to the equation solver.
The expression is stored to the variable
3. Press Í or †. The interactive solver editor is displayed.
•
The equation stored in
Chapter 2: Math, Angle, and Test Operations
from the
menu to display the equation editor.
MATH
is set equal to zero and displayed on the top line.
eqn
menu to the equation solver.
VARS Y-VARS
VARS Y-VARS
as you enter it.
eqn
is empty,
eqn
menu, and
62