Setting The Graph Style - Texas Instruments TI-84 Plus Manual Book

Icon Style
è
Thick
é
Above
ê
Below
ë
Path
ì
Animate
í
Dot
Some graph styles are not available in all graphing modes. Chapters 4, 5, and 6
Note:
list the styles for Par, Pol, and Seq modes.

Setting the Graph Style

Setting the Graph Style Setting the Graph Style Setting the Graph Style
To set the graph style for a function, follow these steps.
1. Press o to display the Y= editor.
2. Press † and } to move the cursor to the function.
3. Press | | to move the cursor left, past the
column. The insert cursor is displayed. (Steps 2 and 3 are interchangeable.)
4. Press Í repeatedly to rotate through the graph styles. The seven styles rotate in
the same order in which they are listed in the table above.
Chapter 3: Function Graphing
Description
A thick solid line connects plotted points
Shading covers the area above the graph
Shading covers the area below the graph
A circular cursor traces the leading edge of the graph and draws
a path
A circular cursor traces the leading edge of the graph without
drawing a path
A small dot represents each plotted point; this is the default in Dot
mode
sign, to the graph style icon in the first
=
102