Invalid; Invalid Dim - Texas Instruments TI-84 Plus Manual Book

Error Type

INVALID

INVALID DIM

Appendix B: Reference Information
Possible Causes and Suggested Remedies
• You attempted to reference a variable or use a
function where it is not valid. For example,
Y Xmin
reference ,
• You attempted to reference a variable or function that
was transferred from the TI.82 and is not valid for the
TI-84 Plus For example, you may have transferred
N
Un 1
to the TI-84 Plus from the TI.82 and then tried
to reference it.
Seq
• In mode, you attempted to graph a phase plot
without defining both equations of the phase plot.
Seq
• In mode, you attempted to graph a recursive
sequence without having input the correct number of
initial conditions.
Seq
• In mode, you attempted to reference terms other
N N
(n 1) (n
than or
• You attempted to designate a graph style that is
invalid within the current graph mode.
• You attempted to use
(turned on) at least one xyLine or scatter plot.
• The ERR:INVALID DIM
you are trying to graph a function that does not involve
the stat plot features. The error can be corrected by
turning off the stat plots. To turn the stat plots off,
y ,
press
• You specified a list dimension as something other
than an integer between 1 and 999.
• You specified a matrix dimension as something other
than an integer between 1 and 99.
• You attempted to invert a matrix that is not square.
@
X TblStart
, , or .
2)
.
Select(
without having selected
error message may occur if
4:PlotsOff
and then select
Yn cannot
.
650