Texas Instruments TI-84 Plus Manual Book page 557

SEND RECEIVE
D: AppVars...
E: Group...
F: SendId
G: SendOS
H: Back Up...
When you select an item on the
displayed.
Each
Note: SELECT
is displayed with everything pre-selected.
All+...
To select items to send:
1. Press y 8 on the sending unit to display the
2. Select the menu item that describes the data type to send. The corresponding
screen is displayed.
SELECT
3. Press } and † to move the selection cursor ( 4 ) to an item you want to select or
deselect.
4. Press Í to select or deselect the item. Selected names are marked with a 0.
Chapter 19: Communication Link
Displays all software application variables.
Displays all grouped variables.
Sends the Calculator ID number immediately.
(You do not need to select SEND.)
Sends operating system updates to another
TI-84 Plus Silver Edition or TI-84 Plus. You can
not send the operating system to the TI-83 Plus
product family.
Selects all RAM and mode settings (no Flash
applications or archived items) for backup to
another TI-84 Plus, TI-84 Plus Silver Edition,
TI-83 Plus Silver Edition, or to a TI-83 Plus.
LINK SEND
screen, except
All+...
menu, the corresponding
, is initially displayed with nothing pre-selected.
LINK SEND
screen is
SELECT
menu.
554