Restoring Easydata To The Default Settings - Texas Instruments TI-84 Plus Manual Book

To change a predefined setting:
1. From the main screen in the EasyData App, choose
The current settings are displayed on the calculator.
: If using a motion detector, settings for
Note
the menu are preset and cannot be changed.
Setup
(press q) to move to the setting you want to change. Press ' to
2. Select
Next
clear a setting.
3. Repeat to cycle through the available options. When the option is correct, select
to move to the next option.
Next
4. To change a setting, enter 1 or 2 digits, and then select
5. When all the settings are correct, select
menu.
(press q) to begin collecting data.
6. Select
Start

Restoring EasyData to the default settings

The default settings are appropriate for a wide variety of sampling situations. If you are
unsure of the best settings, begin with the default settings, and then adjust the settings
for your specific activity.
To restore the default settings in EasyData while a data collection device is connected to
the TI-84 Plus, choose
Chapter 14: Applications
and select
File 1:New
Setup
3: Distance Match
Next
(press s) to return to the main
OK
.
and select
2: Time Graph
and
4: Ball Bounce
(press q).
.
in
408