Correcting An Error - Texas Instruments TI-84 Plus Manual Book

If a syntax error occurs in the contents of a Y= function during program execution,
Note:
then the option returns to the Y= editor, not to the program.
Goto

Correcting an Error

Correcting an Error
Correcting an Error Correcting an Error
To correct an error, follow these steps.
1. Note the error type (
2. Select , if it is available. The previous screen is displayed with the cursor at or
2:Goto
near the error location.
3. Determine the error. If you cannot recognize the error, refer to Appendix B.
4. Correct the expression.
Chapter 1: Operating the TI-84 Plus Silver Edition
).
ERR:error type
50