Setting The Graph Format/Displaying A Graph - Texas Instruments TI-84 Plus Manual Book

Xmax=10
Xscl=1
Ymin=L10
Ymax=10
Yscl=1
To ensure that sufficient points are plotted, you may want to change the q window
Note:
variables.
Setting the Graph Format Setting the Graph Format Setting the Graph Format Setting the Graph Format
To display the current graph format settings, press y .. Chapter 3 describes the
format settings in detail. The other graphing modes share these format settings.
Displaying a Graph Displaying a Graph
Displaying a Graph Displaying a Graph
When you press s, the TI-84 Plus plots the selected polar equations. It evaluates R
for each value of q (from q
The window variables define the viewing window.
As the graph is plotted, X, Y, R, and q are updated.
Smart Graph applies to polar graphs.
Chapter 5: Polar Graphing
Largest X value to be displayed
Spacing between the X tick marks
Smallest Y value to be displayed
Largest Y value to be displayed
Spacing between the Y tick marks
to q in intervals of q
min max
) and then plots each point.
step
148