Moving The Trace Cursor From Function To Function/To Any Valid X Value - Texas Instruments TI-84 Plus Manual Book

If you move the trace cursor beyond the top or bottom of the screen, the coordinate
values at the bottom of the screen continue to change appropriately.
Moving the Trace Cursor from Function to Function Moving the Trace Cursor from Function to Function
Moving the Trace Cursor from Function to Function Moving the Trace Cursor from Function to Function
To move the trace cursor from function to function, press † and }. The cursor follows
the order of the selected functions in the Y= editor. The trace cursor moves to each
function at the same X value. If
Moving the Trace Cursor to Any Valid X Value Moving the Trace Cursor to Any Valid X Value
Moving the Trace Cursor to Any Valid X Value Moving the Trace Cursor to Any Valid X Value
To move the trace cursor to any valid X value on the current function, enter the value.
When you enter the first digit, an
the bottom-left corner of the screen. You can enter an expression at the
Chapter 3: Function Graphing
Trace cursor on the curve
format is selected, the expression is updated.
ExprOn
prompt and the number you entered are displayed in
X=
prompt. The
X=
116