Before Using Select(; Using Select( To Select Data Points From A Plot - Texas Instruments TI-84 Plus Manual Book

example, you can use
CBL 2™/CBL™ or CBR™ data.
Select(xlistname,ylistname)
Before you use
Note:
plot. Also, the plot must be displayed in the current viewing window.

Before Using Select(

Before Using Select(
Before Using Select( Before Using Select(
Before using
Select(
1. Create two list names and enter the data.
2. Turn on a stat plot, select " (scatter plot) or Ó (xyLine), and enter the two list names
for and
Xlist: Ylist:
3. Use
ZoomStat

Using Select( to Select Data Points from a Plot

Using Select( to Select Data Points from a Plot
Using Select( to Select Data Points from a Plot Using Select( to Select Data Points from a Plot
To select data points from a scatter plot or xyLine plot, follow these steps.
1. Press y 9 ~
the home screen.
Chapter 11: Lists
to select and then analyze a portion of plotted
Select(
, you must have selected (turned on) a scatter plot or xyLine
Select(
, follow these steps.
(Chapter 12).
to plot the data (Chapter 3).
to select
8 8:Select(
from the
LIST OPS
menu. is pasted to
Select(
264