Error Conditions/Error Type Table; Archived; Archive Full; Argument/Bad Address - Texas Instruments TI-84 Plus Manual Book

Error Conditions Error Conditions Error Conditions Error Conditions
When the TI-84 Plus detects an error, it returns an error message as a menu title, such
as or
ERR:SYNTAX
and suggestions for correction. The error types listed in this table are each preceded by
on your graphing calculator display. For example, you will see
ERR:
menu title when your graphing calculator detects an
Error Type

ARCHIVED

ARCHIVE FULL

ARGUMENT
BAD ADDRESS
Appendix B: Reference Information
. This table contains each error type, possible causes,
ERR:DOMAIN
Possible Causes and Suggested Remedies
You have attempted to use, edit, or delete an archived
variable. For example, the expression dim(L1) produces
an error if L1 is archived.
You have attempted to archive a variable and there is
not enough space in archive to receive it.
A function or instruction does not have the correct
number of arguments. See Appendix A for function and
instruction syntax.
Appendix A displays the arguments and punctuation
needed to execute the function or instruction. For
example, stdDev(list[,freqlist]) is a function of the TI-84
Plus. The arguments are shown in italics. The
arguments in brackets are optional and you need not
type them. You must also be sure to separate multiple
arguments with a comma (,). For example,
stdDev(list[,freqlist]) might be entered as stdDev(L1) or
stdDev(L1,L2) since the frequency list or freqlist is
optional.
You have attempted to send or receive an application
and an error (e.g. electrical interference) has occurred
in the transmission.
ERR:ARCHIVED
error type.
ARCHIVED
as a
646