Turning On Or Turning Off A Stat Plot In The Y=Editor; Selecting And Deselecting Functions From The Home Screen Or A Program - Texas Instruments TI-84 Plus Manual Book

Turning On or Turning Off a Stat Plot in the Y= Editor Turning On or Turning Off a Stat Plot in the Y= Editor Turning On or Turning Off a Stat Plot in the Y= Editor Turning On or Turning Off a Stat Plot in the Y= Editor
To view and change the on/off status of a stat plot in the Y= editor, use
(the top line of the Y= editor). When a plot is on, its name is highlighted on this line.
To change the on/off status of a stat plot from the Y= editor, press } and ~ to place the
cursor on ,
Plot1 Plot2
Selecting and Deselecting Functions from the Home Screen or a Selecting and Deselecting Functions from the Home Screen or a
Selecting and Deselecting Functions from the Home Screen or a Selecting and Deselecting Functions from the Home Screen or a
Program Program
Program Program
To select or deselect a function from the home screen or a program, begin on a blank
line and follow these steps.
1. Press  ~ to display the
2. Select
4:On/Off
3. Select
1:FnOn
functions. The instruction you select is copied to the cursor location.
4. Enter the number (1 through 9, or 0; not the variable
turn on or turn off.
• If you enter two or more numbers, separate them with commas.
Chapter 3: Function Graphing
, and then press Í.
, or
Plot3
Plot1 is turned on.
Plot2 and Plot3 are turned off.
VARS Y-VARS
to display the
ON/OFF
to turn on one or more functions or
menu.
secondary menu.
2:FnOff
) of each function you want to
Yn
Plot1 Plot2 Plot3
to turn off one or more
100