Moving The Trace Cursor To Any Valid N Value - Texas Instruments TI-84 Plus Manual Book

When , ,
Time uv vw
sequence one
PlotStep
y ~ or y |.
• When you begin a trace, the trace cursor is on the first selected sequence at the
term number specified by
• Quick Zoom applies to all directions. To center the viewing window on the current
cursor location after you have moved the trace cursor, pressÍÍ. The trace cursor
returns to
nMin
In Web format, the trail of the cursor helps identify points with attracting and repelling
behavior in the sequence. When you begin a trace, the cursor is on the x-axis at the
initial value of the first selected function.
To move the cursor to a specified
Note:
Í. For example, to quickly return the cursor to the beginning of the sequence, paste
prompt and press Í.
to the
nMin n=
Moving the Trace Cursor to Any Valid

Moving the Trace Cursor to Any Valid n Value

Moving the Trace Cursor to Any Valid Moving the Trace Cursor to Any Valid
To move the trace cursor to any valid
When you enter the first digit, an
the bottom-left corner of the screen. You can enter an expression at the
Chapter 6: Sequence Graphing
, or axes format is selected, TRACE moves the cursor along the
uw
increment at a time. To move five plotted points at once, press
PlotStart
.
prompt and the number you entered are displayed in
n=
, even if it is outside the viewing window.
during a trace, enter a value for
n
Value Value Value
value on the current function, enter the number.
n
, and press
n
prompt. The
n=
163