Drawing On A Graph - Texas Instruments TI-84 Plus Manual Book

Before Drawing on a Graph Before Drawing on a Graph Before Drawing on a Graph Before Drawing on a Graph
The DRAW instructions draw on top of graphs. Therefore, before you use the DRAW
instructions, consider whether you want to perform one or more of the following actions.
• Change the mode settings on the mode screen.
• Change the format settings on the format screen.
• Enter or edit functions in the Y= editor.
• Select or deselect functions in the Y= editor.
• Change the window variable values.
• Turn stat plots on or off.
• Clear existing drawings with
If you draw on a graph and then perform any of the actions listed above, the graph
Note:
is replotted without the drawings when you display the graph again.

Drawing on a Graph

Drawing on a Graph
Drawing on a Graph Drawing on a Graph
You can use any
DRAW
Seq graphs.
DrawInv
instructions are the display's x-coordinate and y-coordinate values.
You can use most
a graph, using the cursor to identify the coordinates. You also can execute these
instructions from the home screen or from within a program. If a graph is not displayed
when you select a
Chapter 8: Draw Instructions
ClrDraw
menu instructions except
is valid only in Func graphing. The coordinates for all DRAW
menu and
DRAW DRAW POINTS
menu instruction, the home screen is displayed.
DRAW
.
to draw on Func, Par, Pol, and
DrawInv
menu instructions to draw directly on
187