260
Chapter 13: Link and the CBLàCBR Application
•
When you select
and you can enter another appropriate variable name
using the - } menu (for example, renaming
where
Pic2
the Text editor (- t) (for example, renaming
¨ABC
where
not enter the
that it is a list name. Press b to resume transmission.
Note: You cannot rename software applications or
constants (the
DuplicateName
•
When you select
overwrites the existing data stored on the receiving unit.
Transmission resumes.
•
When you select
the data in the duplicated variable name. Transmission
resumes with the next item.
•
When you select
receiving unit exits receive mode.
Transmission Error Conditions
A transmission error (
seconds if:
•
The unit-to-unit cable is not attached to the sending or
receiving unit. Note: If the cable is attached, push it in
firmly and try again.
•
The receiving unit is not set to receive transmission.
•
You attempt a backup between a TIN73 and a TIN82 or
TIN83.
•
You attempt a data transfer from a TIN73 to a TIN82 with
data other than numerical lists,
menu item
, the
1:Rename
is undefined), or you can enter text using
Pic2
¨ABC
is undefined). When renaming lists, do
(- v
¨
OPS 9
option is excluded from the
1:Rename
menu).
2:Overwrite
, the sending unit does not send
3:Omit
, transmission stops, and the
4:Quit
Error in Xmit
.
9:Vars to TI82
prompt is displayed,
Name=
). The calculator assumes
, the sending unit's data
) occurs after one or two
-
, or without using
L
L
1
6
to
Pic1
to
L
1