Moving From Function To Function; Automatic Panning; Before/After Automatic Pan - Texas Instruments TITANIUM TI-89 User Manual

Moving from Function to Function

Moving from Function to Function Moving from Function to Function Moving from Function to Function
Press C or D to move to the previous or next selected function at the same x value. The
new function number is shown on the screen.
The "previous or next" function is based on the order of the selected functions in the Y=
Editor, not the appearance of the functions as graphed on the screen.

Automatic Panning

Automatic Panning Automatic Panning Automatic Panning
If you trace a function off the left or right edge of the screen, the viewing window
automatically pans to the left or right. There is a slight pause while the new portion of the
graph is drawn.
Before automatic pan
After an automatic pan, the cursor continues tracing.
Automatic panning does not work if stat plots are displayed or if a function uses a
Note:
shaded display style.
Basic Function Graphing
After automatic pan
323