Rear Right Housing (Artisan 700/Px700W/Tx700W) - Epson Stylus Photo PX700FW Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.3.1.6 Rear Right Housing (Artisan 700/PX700W/TX700W)

The disassembly/reassembly procedures for Artisan 800/PX800FW/
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
4.2.2.10 "Rear Right FAX Housing" (p112)
Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing/Hinge
Removal procedure
1. Remove the screw (x1) that secures the Rear Right Housing.
Rear Right Housing
Figure 4-220. Removing the Rear Right Housing (1)
DISASSEMBLY/ASSEMBLY
for the procedures.
Hook A
C.B.P. 3x10 (6±1Kgfcm)
C.B.S. 3x6 (black) (8±1Kgfcm)
C.B.A. 3x10 (black) (6±1Kgfcm)
Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W
https://www.manualsbooks.com
Release the ribs (x2) on the right side, and also release the point A, then
2.
remove the Rear Right Housing by lifting it in the direction of the arrow. (See
Fig. 4-220.)
Right Housing
Rear Right Housing
Figure 4-221. Removing the Rear Right Housing (2)
When installing the Rear Right Housing, insert the ribs (x2) of
the Rear Right Housing to inside of the Right Housing. (See
4-221.)
When installing the Rear Right Housing, align the point A of
the Rear Right Housing with the inside of the Base Frame. (See
Fig. 4-221.)
Revision C
Point A
Rib
l
Confidential
Fig.
192