Epson Stylus Photo PX700FW Service Manual page 140

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
5. Into the screw hole of the Printhead, align and slowly insert the tip of the Ink
Supply Tube screwing tool inserted in the Ink Supply Tube Assy.
If the joint of the Printhead and the Ink Supply Tube Assy is not
disconnected, simply tighten the screw shown in
using the jig.
6. Secure the Ink Supply Tube Assy with the screw with the Ink Supply Tube
screwing tool inserted.
Printhead
Ink Supply Tube Assy
Figure 4-66. Assembling the Printhead (3)
DISASSEMBLY/ASSEMBLY
Fig. 4-66 without
Ink Supply Tube screwing tool
C.B.P. 2x10 (Black; 2.5Kgfcm)
Disassembly Procedures
https://www.manualsbooks.com
7. Insert the thickness gauge from the hole on the side of the Ink Supply Tube
screwing tool, and remove the tool gently while holding the Ink Supply Tube
Assy.
Ink Supply Tube screwing tool
Thickness gauge
Figure 4-67. Assembling the Printhead (4)
8. Tighten the screws (x2) in order shown in
gauge, and secure the Ink Supply Tube Assy to the Printhead.
Figure 4-68. Assembling the Printhead (5)
Revision C
Insert from 0 digit side
Fig. 4-68 while holding the thickness
C.B.P. 2x10 (2.5Kgfcm)
128
Confidential