Epson Stylus Photo PX700FW Service Manual page 78

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Occurrence
Symptoms
Timing
Photo Tray does not move
Any time
at all.
Occurrence
Symptoms
Timing
The error occurs even the
Any time 12cm CD/DVD is on the
CDR Tray.
TROUBLESHOOTING
Table 3-11. Check point for the Photo Tray Error according to each phenomenon
Failed Part /
Part Name
1. Is the Cassette Unit correctly installed?
Cassette
2. Is the Cassette Unit damaged?
1. Is the Photo Tray Sensor cable properly connected to
CN12 connector on the Main Board?
Photo Tray
2. Is Photo Tray Sensor cable damaged?
Sensor
3. Is Photo Tray Sensor damaged?
Table 3-12. Check point for the CD size Error according to each phenomenon
Failed Part /
Part Name
1. Is the PW Sensor free from ink stain or paper dust?
2. Is the PW Sensor connector cable properly connected to
the connector of the PW Sensor and CR Encoder board?
PW Sensor
3. Is the PW Sensor connector cable damaged?
4. Is the PW Sensor damaged?
1. Is the white marking of the CDR Tray free from ink stain
or paper dust?
CDR Tray
2. Is CDR Tray correctly installed?
Troubleshooting by Error Message
https://www.manualsbooks.com
Check Point
1. Install Cassette Unit correctly.
2. Replace the Cassette Unit with a
new one.
1. Connect the Photo Tray Sensor
cable correctly to CN12 on the
Main Board.
2. Replace the printer mechanism
with a new one
3. Replace the printer mechanism
with a new one
Check Point
1. Clean the surface of the PW
Sensor.
2. Connect the PW Sensor
connector cable correctly.
3. Replace the Carriage Unit with a
new one.
4. Replace the Carriage Unit with a
new one.
1. Clean the marking of the CDR
Tray.
2. Install the CDR Tray correctly.
Revision C
Remedy Reference
4.2.2.12 " Cassette Unit "
(p.114)
4.2.3.2 " Main Board /
Grounding Plate M/B "
(p.117)
---
Remedy Reference
4.2.4.16 " Carriage Unit "
(p.154)
4.2.4.8 " CDR Tray Assy "
(p.140)
Confidential
68